Fostex FR-2 User Manual download pdf (Page 24)

FR-2

Field Memory Recorder (Chapter 2: Before using the FR-2)

About memory card

The FR-2 records audio data to a memory card such as a CompactFlash card ("CFC" for

short) and Flash ATA Card (ATA, for short) which are formatted with the FAT32 file

system.

<Note>:

A virgin memory card which is FAT32 formatted can be used without the need of

initial-formatting, however, we recommend to format such a card using the "Format" menu

item on the "DISK" menu in the MENU mode. Also, if you use a FAT32 formatted memory card

which has been used with a PC, we recommend to format it in the same manner.

See “Formatting a memory card” on page 76 for details about the “Format” menu item.

Inserting/removing a memory card

<Note>:

You can remove or insert a card regardless of whether the power is on or off,

however, never remove a card while the FR-2 is writing data to the card or reading data

from the card. When you remove or insert a card when the power is on, follow the

appropriate procedures described from the next page. Also be sure to insert a card in

the correct direction and side. Note that Fostex is not responsible for any damage of a

card caused by incorrect card handling. Note that Fostex is not responsible for any

damage of a card caused by incorrect card handling.

• Fostex is not responsible for any "direct damage" or "indirect damage" caused by using the

unit.

RL/MONO

ANALOG INPOWER ANALOG OUT

L/MONO

PHANTOM

COLD

GND

HOT

OFF

COMPACTFLASH CARD

PCMCIA

（１）（2）

COMPACTFLASH CARD

CompactFlash card

Flash ATA Card

A memory card should be inserted to the appropriate card slot on the side panel

of the unit. A CFC should be inserted to slot (1), while an ATA should be inserted

to slot (2) in the figure below.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 109 110

No comments

Fostex FR-2 User Manual Page 24