Fostex FR-2 User Manual download pdf (Page 35)

FR-2

Field Memory Recorder (Chapter 3: Names and functions)

17) Internal monitor speaker

This speaker is used for monitoring.

When a headphones plug is inserted to the [PHONES] jack, this monitor speaker is muted.

You can also select whether or not muting the speaker except during playback using the

"Speaker Mute" menu item on the "Setup" menu in the MENU mode.

See "Speaker mute function on/off" on page 86 for details.

<Note>:

When recording a digital source whose FS is unknown, the internal clock locks

to the digital source and recording is made with the FS selected by the [FS (kHz)] switch.

If the FS of the digital source is 48 or 44.1 kHz, the internal clock locks to the digital

source and recording is made with the FS of the digital source.

19) QUANTIZATION switch

Selects a quantization bit (16 and 24 bits) for recording.

You can select from among the following combinations of FS and quantization bit.

20) [PRE REC] switch

Selects ON or OFF of the PRE REC mode.

When it is set to ON, input data is always stored to the internal buffer.

If you start recording when the [PRE REC] switch is set to ON, the previous data is first

delivered from the buffer. You may not miss the start of an important event to be recorded.

The time length of audio stored in the buffer depends on the FS setting. You can edit the

time length using the "Pre Rec Time" menu item on the Setup menu in the MENU mode.

See "Setting the time length stored in the buffer for Pre rec mode" on page 89 for details.

MONO

The left channel of a source is recorded in mono.

STEREO

A stereo source is recorded in stereo.

16Bit

22.05kHz / 44.1kHz / 48kHz

24Bit

44.1kHz / 48kHz / 882.kHz / 96kHz / 176.4kHz / 192kHz

18) [FS (kHz)] switch

Selects a sampling frequency (FS) for recording.

You can select a desired FS from among 22.05, 44.1, 48, 88.2, 96, 176.4 and 192 kHz.

Phones

Speaker mute

setting

Disconnected

Connected

Off

During input monitor

During recording

During playback

Input monitor

Source monitor Playback monitor

Playback monitor

Mute

During recording (or input monitor) with the [TRACK MODE] switch set to "MONO", you

can monitor the source in mono (positioned in center) via headphones.

21) [TRACK MODE] switch

Selects the track mode for recording between STEREO and MONO.

22) [LIMTER] switch

Selects ON or OFF of the LIMTER function.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 109 110

Comments to this Manuals

No comments

Fostex FR-2 User Manual Page 35

Comments to this Manuals

Related products and manuals for Car DVR Fostex FR-2