Fostex VF08 User Manual Page 113

  • Download
  • Add to my manuals
  • Print
  • Page
    / 118
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 112
113
Specifications
Maintenance
Specifications
Recording/Reproducing
Recording Medium : 3.5 inch, hard disk (E-IDE type)
Recording Format : FDMS-3 (*)
Save/Load Format : FDIO-1 (**)
Sampling Frequency : 44.1kHz
Quantization : 16-bit linear (Non expanded)
A/D Converter : 20-bit 64 times, over sampling, Delta-Sigma
D/A Converter : 24-bit 128 times, over sampling, Delta-Sigma
No. of Recording Track : 8 real tracks + 16 additional tracks
*2 tracks for simultaneous recording (Maximum)
Vari Pitch Control : +/- 6%
Crossfade : 10msec.
Recording/Reproducing Frequency : 20Hz ~ 20kHz
Input/Output
Input A, B
Connector : ø6mm Phone jack (Unbalanced)
: XLR-3-31 type connector (Balanced)
Input Impedance : 50k or more (Unbalanced)
:1k or more (Balanced)
Standard Input Level : -50 ~ +4dBu
Phantom Power (XLR only) : +48VDC (Setting of ON/OFF with PHANTOM switch)
HEADPHONE
Connector : ø6mm TRS Phone jack
Load Impedance : 10 ~ 50
Output Level : 20mW or more (at 32)
STEREO OUT L, R
Connector : ø6mm Phone jack
Load Impedance : 10k or more
Output Level : -10dBV
S/P DIF DIGITAL IN
Connector : COAXIAL
Format : IEC 60958 (S/P DIF)
DIGITAL OUT
Connector : COAXIAL
Format : IEC 60958 (S/P DIF)
MIDI IN/OUT
Connector : DIN 5 PIN
PUNCH IN/OUT
Connector : ø6mm Phone jack (An optional FOOT SW Model 8051
can be connected.)
SCSI (Option)
Connector : D-sub half pitch 50 pin
Cleaning the exterior
* For normal cleaning, use a soft dry cloth.
For stubborn dirt, moisten a cloth in diluted detergent, wring it out firmly, and wipe the dirt off.
Then polish with a dry cloth. Never use solvents such as alcohol, thinner or benzene, since these will
damage the printing and finish of the exterior.
Page view 112

Comments to this Manuals

No comments