Fostex VF08 User Manual download pdf (Page 95)

Save/Load of Song data

When saving data onto more than one disk, the current

disk number is shown on the screen as "Disk*" (where

* indicates the number).

Immediately after the data save to each disk is

completed, the disk is automatically ejected, and

"Insert Disk*" blinks on the screen, prompting you to

insert the next disk.

Inserting the next disk resumes the save operation.

After the save operation is completed, "Completed!"

appears on the screen.

<Hint>

In the save operation which requires more than

one backup disk, if you use a backup disk which

contains any program(s) saved, the display shows

the screen as shown below.

This screen is asking you weather to delete all

existing WAV files on the disk or to eject the disk.

To delete all the existing files, select "All Delete"

and press the [ENTER/YES] key. All existing files

are deleted and the disk is ready for saving data.

If you do not want to delete the existing files, select

"Eject" and press the [ENTER/YES] key. The disk is

ejected so you can insert another disk.

To select between "All Delete" and "Eject", press

the [CURSOR] key.

Press the [EXIT/NO] key (or the [STOP] key)

repeatedly until exiting the setup mode.

###### 01. WAV

###### 02. WAV

###### 24. WAV

•WAV file structure

A WAV file on the backup disk has 24 files (one file

per track) in the root directory of the disk.

The file names are "******01.WAV" through

"******24.WAV" where "******" shows the file name

specified in step 8 above and each number (01 - 24)

shows the corresponding track number.

If a track has no data recorded, the corresponding file

with no data is created.

•WAV file structure which is saved over more than

one disk

A WAV file is saved in order of track number (from

tracks 1 to 24).

During the save operation over more than one backup

disk, the VF08 always calculates the available space

of the disk automatically. If the VF08 knows that the

available space gets smaller than the data size of the

next track, it will change the disk when the data save

of the current track is completed.

•WAV file size

When saving data by the WAV file format to a backup

disk, the file size may sometimes increase compared

with the data size in the current drive, depending on

the recorded data condition such as the start time,

end time, the data amount, etc. on each track.

For example, if a track is recorded from ABS:0 (min.)

to ABS:1 (min.) and ABS:10 (min.) to ABS 11 (min.),

the file on the current drive has a length of 2 minutes,

while the WAV file has a length of 11 minutes.

Also as mentioned above, if a track has no data

recorded, the corresponding WAV file with no data is

created though the size is small.

<Notes>

•If the file name you are going to save duplicates with

the existing WAV file name on the backup disk,

"Warning! Already Exist" is shown on the screen and

the save operation will not be executed. In such a case,

change the file name according to the procedure above

and carry out the save operation again.

•A disk on which you have overwritten data many

times may lower the access speed because of the disk

fragmentation. Therefore, we suggest that you should

use a newly formatted "clean" disk for backup.

•If any other file but "******##.WAV" or folder, which

cannot be recognized by the VF08, is created on the

backup disk using a personal computer, the VF08

cannot calculate the available backup disk space

accurately. Accordingly, it may happen that the save

operation cannot be completed. You should note this

when changing the file name or creating a folder using

your computer.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 117 118

Comments to this Manuals

No comments

Fostex VF08 User Manual Page 95

Comments to this Manuals

Related products and manuals for Digital pianos Fostex VF08