Fostex MR-8HD/CD User Manual download pdf (Page 18)

MR-8HD/CD Supplementary manual

3) Use the [MENU/ENTER] knob to select "Song

Export

" and press the [MENU/ENTER] knob.

The display now shows the screen for setting

the start time, end time and exported tracks.

The display now highlights “[EXECUTE]”.

By default, these items are set as follows.

• Start time: The beginning of a song (ABS 0)

• End time: The last recording position of a song

• Track selection: All tracks (1 through 8)

In other words, by default, you can export full

length of all tracks. If you export a song data

with the default setting above, skip to step 10.

If you edit the setting, go to steps 4 through 9.

4) Use the [MENU/ENTER] knob to select "Start Time:

0m 00s 000" and press the [MENU/ENTER] knob.

You can now edit the start time of the exported

file(s).

<How to edit a time>

To edit the start or end time of the ex-

ported file(s), use either of the following

operation methods.

• Using the [MENU] dial:

Use the [REWIND] or [F FWD] key to move

the editing point and use the [MENU/ENTER]

knob to edit the value.

• Using the numeric keys:

Directly enter a desired number using the

appropriate numeric key. Each time you

press a numeric key, the entered numbers

on the screen move from the right towards

the left. You can also use the [REWIND] or [F

FWD] key to move the editing point.

7) After editing the end time, press the

[MENU/ENTER] knob.

"End Time: *m **s ***" is now highlighted.

8) Use the [MENU/ENTER] knob to select "TRK"

and press the [MENU/ENTER] knob.

You can now select the exported tracks.

Selected tracks are highlighted.

Only TRK "1" flashes.

<Note>:

A blank track is not highlighted.

<How to select or deselect a track>

Rotating the [MENU/ENTER] knob left dese-

lects the flashing track, while rotating the

[MENU/ENTER] knob right selects the flash-

ing track.

Use the [F FWD] and [REWIND] keys to se-

lect the flashing track.

5) After editing the start time, press the

[MENU/ENTER] knob.

"Start Time: *m **s ***" is now highlighted.

6) Use the [MENU/ENTER] knob to select

"End Time" and press the [MENU/ENTER] knob.

You can now edit the end time of the exported

file(s).

9) After selecting/deselecting the exported tracks,

press the [MENU/ENTER] knob.

"TRK" is now highlighted.

Flashing

18

Flashing

Flashing

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Comments to this Manuals

No comments