Fostex MR-8HD/CD User Manual download pdf (Page 24)

MR-8HD/CD Supplementary manual

6) Use the [MENU/ENTER] knob to select the

desired WAV file and press the [MENU/ENTER]

knob.

The unit starts writing the file to the CD-R/RW

disc. Depending on the selected burning mode,

either of the following screens is shown.

While the unit is writing data to the disc,

"Writing..." is popped up and " ACC " is flashing

on the screen.

Also the ACCESS indicator of the CD-R/RW drive

is flashing. Do not turn off the power or press

the eject switch of the drive while writing.

While writing data to the disc, any operational

keys of the MR-8HD/CD are disabled.

Now writing in the Track at once mode

Now writing in the Disk at once mode

<Note>:

If the selected stereo WAV file is larger

than the available disc space of the current CD-

R/RW disc, the following message pops up and

you cannot start writing (you can dismiss the

message by pressing the [MENU/ENTER]

knob). Change the disc to another one with

enough space and carry out the same opera-

tion procedure.

When writing is completed, "Completed!" is

shown and the disc access stops.

Now writing in the

Track at once mode is completed

Now writing in the

Disk at once mode is completed

7) Press the [MENU/ENTER] knob.

The display returns to the USB HOST menu

screen, where "CD Burn " is highlighted.

When the disc is burned in the "Disk at once"

mode, it is automatically finalized after writing

is completed, and then ejected.

You can check the TOC information if desired.

See "Viewing the TOC information after finaliz-

ing" on page 27 for details.

When the disc is burned in the "Track at once"

mode, go to step 8 for finalizing the disc.

If you want to write more than one stereo WAV

file, repeat steps 4 through 6 above, and go to

step 8 for finalizing after writing all the desired

stereo WAV files.

You can check the TOC information any time

(both before and after finalizing). It is recom-

mended to check the remaining time (the re-

cordable time left) from the TOC information

whenever you write an additional stereo WAV

file (see "Viewing the TOC information" on page

26 for details).

8) Use the [MENU/ENTER] knob to select

"CD Finalize

" and press the [MENU/ENTER]

knob.

The display now shows the confirmation screen

for finalizing, where "[CANCEL]" is highlighted.

To cancel finalizing, highlight "[CANCEL]" and

press the [MENU/ENTER] knob.

To start finalizing, highlight "[EXECUTE]" and

press the [MENU/ENTER] knob.

24

1 2 ... 19 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments