Fostex VF160EX User Manual download pdf (Page 38)

Auto Punch IN/OUT

Before carrying out an auto punch in/out operation, you

must register the “PUNCH IN” and “PUNCH OUT” points.

• Programming the PUNCH IN/OUT points

2. Press the [STORE] key (RED: Light ON).

3. The PUNCH IN point is programmed when the [AUTO

PUNCH IN] key is pressed. The PUNCH OUT point is

programmed when the [AUTO PUNCH OUT] key is

pressed.

<Note>

When programming a PUNCH IN/OUT point, the time of

the punch IN point must always be before the time of the

PUNCH OUT point. If the PUNCH OUT point precedes the

PUNCH IN point, a “

Void Out!”

error message appears on the

LCD and prevents use of the AUTO PUNCH mode.

• AUTO PUNCH IN/OUT rehearsal

1. Press the [RECORD] key while the [SHIFT] key is

depressed to go to the “AUTO PUNCH Mode”.

“RHSL” starts flashing.

2. LOCATE the point immediately before starting the

recording.

3. If only the [PLAY] key is pressed, the recordings are

rehearsed.

“RHSL” steadily lights. In the rehearsal mode, even though

recording is not actually executed, the monitor signal for

a record-armed track changes to “input” at the punch-in

point and returns to “source” at the punch-out point.

You can check or adjust the record level and timing in the

rehearsal mode as many times as you want until you are

satisfied.

4. Press the [STOP] key to stop the VF160EX.

1. While the system is in the PLAY or STOP mode, press the

[HOLD/>] key at the time to program as the PUNCH IN or

PUNCH OUT point.

4. Press the [STOP] key to stop the VF160EX.

Flashing

• AUTO PUNCH IN/OUT take

1. After rehearsal is completed, locate the point immediately

before starting the recording, as with step 2 of AUTO

PUNCH IN/OUT rehearsal.

3. Press the [RECORD] key while the [PLAY] key is

depressed to start recording [TAKE].

“RHSL” changes to “TAKE”.

The actual recording is made between the PUNCH IN and

PUNCH OUT points. At the PUNCH OUT point, recording as

well as the AUTO PUNCH mode stops.

Light up

Tips: Undo/Redo

If you are not satisfied with the take, you can rerecord

after pressing the [UNDO/REDO] key.

Punch In point

Recording Track

Playback Record

Playback

Punch Out point

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 157 158

Comments to this Manuals

No comments

Fostex VF160EX User Manual Page 38

Comments to this Manuals