Fostex VF160EX User Manual download pdf (Page 53)

Flashing

5. After completing the pre/post selection, press the [EXIT/

NO] key.

The VF160EX exits the channel edit mode and the display

returns to the Normal display.

Controlling AUX SEND level

You can control send levels of channels 1 through 16

(pre- or post-fader) from the [AUX SEND] jack on the rear

panel. The master channel controls the AUX send

master level.

1. Press the [AUX1/AUX2] key to bring up the AUX send level

screen.

Each time you press the [AUX1/AUX2] key, the AUX1 send

level and AUX2 send level screens alternate.

The first time you bring up the channel parameter edit

screen, the message prompting to select a channel ("Select

CH!") flashes, as well as all the CH STATUS/CH SEL

indicators on the panel flash. From the second time on,

the previously selected channel is selected and ready to be

edited when bringing up the screen (as shown in the

drawing of step 2 below).

2. Press the [CH STATUS/CH SEL] key of the desired

channel.

The current settings are shown, together with the selected

channel name. The icon for the selected channel is

flashing, indicating that you can edit it.

Flashing

3. Use the [JOG] dial to control the send level.

The numeric value and the marker position of the rotary

pot icon change according to the current level. ("80", the

default value, is the reference level.)

•Controllable channels:

Channels 1 through 16 and the master level.

•Available values:

00 to 99 (dB), (the default setting: channels 1 through

16: “00”, master level: “80”)

4. To set another channel's send level, repeat steps 2 and

3 above.

Selecting pre/post of AUX sends

You can select whether the pre-fader or post-fader sig-

nal is fed from each channel (1 to 16) to the [AUX SEND]

jack. If you select "Post", the signal adjusted by the chan-

nel fader is sent to the effect processor, so if you lower

the channel fader, the signal sent to the effect proces-

sor is also lowered.

If you select "Pre", the signal that is not affected by the

channel fader is sent to the effect processor, so even if

you lower the channel fader to minimum, the signal can

be sent to the effect processor.

1. Press the [AUX1/AUX2] key while holding down the

[SHIFT] key to bring up the pre/post selection screen.

Each time you press the [AUX1/AUX2] key while holding

down the [SHIFT] key, the pre/post selection screens for

EFF1 and EFF2 alternate. The first time you bring up the

channel parameter edit screen, the message prompting to

select a channel ("Select CH!") flashes, as well as all the CH

STATUS/CH SEL indicators on the panel flash.

From the second time on, the previously selected channel

is selected and ready to be edited when bringing up the

screen (as shown in the drawing of step 2 below).

Flashing

2. Press the [CH STATUS/CH SEL] key of the desired

channel.

The current settings are shown, together with the selected

channel name. The icon for the selected channel is

flashing, indicating that you can edit it.

3. Use the [JOG] dial to switch the selection.

The icon color and label changes according to the

selection, as shown below.

The pre-fader signal is fed to the AUX SEND

jack.

The post-fader signal is fed to the AUX SEND

jack.

•Controllable channels:

Channels 1 through 16.

•Available options:

PRE or PST (post) (default: all channels: “PST”)

4. To set another channel's pre/post selection, repeat steps

2 and 3 above.

Flashing

If two adjacent channels are fader-paired, pressing one

of the [CH STATUS/CH SEL] keys for these channels selects

both channels and you can adjust levels for both chan-

nels simultaneously. See page 146 for details about how

to pair faders of adjacent two channels.

5. After completing send level editing, press the [EXIT/NO]

key.

The VF160EX exits the channel edit mode and the display

returns to the Normal display.

Flashing

If two adjacent channels are fader-paired, pressing one

of the [CH STATUS/CH SEL] keys for these channels selects

both channels and you can set PRE or POST for both

channels simultaneously. See page 146 for details about

how to pair faders of adjacent two channels.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 157 158

Comments to this Manuals

No comments

Fostex VF160EX User Manual Page 53

Comments to this Manuals